In the process of producing glass bottles, there are often various defects (defective products), such as the capacity and the weight of the bottle body. Under normal circumstances, the capacity and weight of the glass bottle have a certain proportion. If it exceeds the normal If the ratio is high, there will be problems of production difficulties and product defects. Today, this information will be briefly introduced, and I hope it can be of some help to everyone.
Take a product with a capacity of 100ml as an example, the normal body weight of 150g is normal. Many buyers want to increase the thickness of the bottom of the bottle and keep the capacity of the bottle unchanged. The weight of the bottle is required to be 200g. The order for bottles is not large, which often causes troubles for glass bottle manufacturers, but in some cases, it is not allowed, such as defective products that are prone to appear during production.
【1】Stick the bottle. It is that the two glass bottles are connected to each other and the body of the bottle is not smooth. The reason is that the cooling is not in place due to the thickness of the wall.
[2] The bottom of the bottle collapsed. Poor cooling at the bottom of the glass bottle causes the deformation of the bottom of the bottle. The solution to the above two defective products is to reduce the machine speed, which directly affects the production quantity.
The glass bottle factory suggests that when producing this special product, try to adjust the machine speed to the best state. If the purchase volume is large, try to produce the whole unit as much as possible, which is conducive to the bottle maker to adjust the machine, which is of great benefit to the quality of the product and to the quality of the product. The production volume can also be improved. This information is not considered a technical post, but just a little experience accumulated at ordinary times. I hope you like it.
