In the process of producing glass bottles, various defects (defective products) often appear, such as the capacity and the weight of the bottle body. Under normal circumstances, the capacity and weight of the glass bottle have a certain ratio. If it exceeds In a normal ratio, there will be production difficulties and product defects. Today I will briefly introduce this information, hoping to be of some help to everyone.
Take a product with a capacity of 100ml as an example. A normal bottle body weighs 150 grams is normal. Many buyers want the bottom of the bottle to be thicker and the capacity of the bottle body to remain the same. The weight of the bottle is required to be 200 grams. The order for gram bottles is not large, often this situation will cause troubles for glass bottle manufacturers, but in some cases, it is not allowed, such as defective products that are prone to appear during production, 1: Sticky bottles, that is, two glass bottles are connected to each other to cause the bottle body Unsmooth, the reason, the cooling is not in place due to the thickness of the wall, 2: The bottom of the bottle collapses, the bottom of the glass bottle is not cooled well, and the bottom of the bottle is deformed. The solution to the above two defective products is to reduce the speed of the machine, and the speed of the machine will directly affect the production. quantity.
The glass bottle factory recommends that when producing this special product, try to adjust the machine speed to the best state. If the purchase volume is large, try to produce the whole unit as much as possible, which is beneficial to the bottle maker to adjust the machine, which is of great benefit to the quality of the product and to the quality of the product. Production can also be increased
vit has strict control on production quality, for more interesting information, please visit our website
